//Back To// [[:Start| MBSE Wiki]] ====== MBSE Workshop at INCOSE IW 2012 ====== This page provides a summary of the Model-based Systems Engineering (MBSE) Workshop held on January 21-21, 2012 at the INCOSE International Workshop (IW) in Jacksonville, Florida. (Note: Attendees registered for the INCOSE IW and MBSE Workshop at http://www.incose.org/newsevents/workshop/index.aspx .) ===== INCOSE IW 2012 MBSE Workshop ===== Thanks to those who were able to join us at the INCOSE Model-Based Systems Engineering (MBSE) Workshop in Jacksonville, Florida on January 21-22 as part of the INCOSE International Workshop 2012, and thanks to the presentors for their contribution. The agenda and presentations are included below, and some of the takeaways and the results of an MBSE Survey are included as part of the wrap-up section. Please look for opportunities to share the presentations and results within your organization and across the broader community, and help us move towards our vision of an integrated model-based engineering environment which can address the evolving system complexities and needs. **Workshop Objectives and Agenda** The workshop is intended to provide an opportunity to learn about the latest MBSE activities, and to network with others involved in MBSE. On Saturday, the Workshop included presentations from the MBSE Activity and Challenge Teams in areas such as Methodology and Metrics, MBSE Usability, SoS/Enterprise Modeling, Ontology, Model Management, and Modeling Standards. On Sunday, the Workshop included presentations from other engineering disciplines to share how they approach modeling, and the role MBSE can play to help address their integration challenges. We also heard about other advanced approaches to integrated modeling. The Workshop helps us assess our progress and challenges to achieving our vision of a fully integrated modeling environment that can meet the current and future challenges of systems development. The agenda and associated presentations included the following: **MBSE Workshop AGENDA** **Saturday, January 21, 2012** **10:30-12:00** * Introduction - Sanford Friedenthal, Mark Sampson (15 minutes) {{:mbse:mbse_iw_2012-introduction-2012-01-21-friedenthal-c.pptx | Introduction}} * Report from MBSE Activity and Challenge Teams (25 minutes each) * Methodology and Metrics Activity Team – John Watson {{:mbse:mbse_iw_2012-methods_and_metrics_activity_brief_watson_r4.pptx| Methods and Metrics Activity Team }} * Modeling & Simulation Interoperability Challenge Team - Russell Peak {{:mbse:mbse_iw_2012-msi_challenge_team-peakv2.ppt | MSI Team Update}} * Australia MBSE Working Group – Quoc Do {{:mbse:mbse_iw_2012-concept_engineering_wg-2012-01-20-quoc-do.pptx | Concept Engineering WG}} **13:00-14:40** * Report from MBSE Activity and Challenge Teams (25 minutes each) *SoS/Enterprise Modeling Activity Team – Ron Williamson {{:mbse:mbse_iw_2012-sos-enterprise_modeling-introduction-williamson.ppt | SoS-Enterprise Modeling Introduction}} *Model Management Activity Team – Joe Bedocs {{:mbse:mbse_iw_2012-model-management-introduction-1-bedocs.pptx | Model Management Introduction}} *Space Systems Challenge Team – Chris Delp {{:mbse:mbse_iw_2012-sswg-2012-01-21-delp.ppt | Space Systems}} *Ontology Activity Team – Henson Graves{{:mbse:incose_iw_jan_2012.2.pptx|Ontology Action Team}} **15:00-17:15** * Report from MBSE Activity and Challenge Teams (25 minutes each) *AFIS MBSE Working Group  -  Michel Galinier {{:mbse:mbse_iw_2012-afis_mbse_wg-wippler.ppt | AFIS MBSE Working Group}} *MBSE Usability Activity Team – Scott Workinger {{:mbse:mbse_iw_2012-mbse_usability-workinger.pptx | MBSE Usability}} *BioMedical Modeling Challenge Team – Steve Corns/Chad Gibson {{:mbse:mbse_iw_2012-biomedical_device_modeling_challenge_team-corns-gibson-a.pptx | Biomedical Device Modeling Challenge Team}} *Modeling Standards Activity Team – Roger Burkhart {{:mbse:mbse_iw_2012-modeling_standards-burkhart.pptx| Modeling Standards}} *Summary and Agenda for Sunday – Sanford Friedenthal **Sunday, January 22, 2012** **08:15 -10:00** *Presentations on multi-disciplinary engineering modeling approaches, key practices, and integration challenges (35 minutes each) *Digital Tapestry (Chris Oster-Lockheed Martin) {{:mbse:mbse_iw_2012-lm_digital_tapestry-oster.pptx | Lockheed Martin Digitial Tapestry}} *Embedded system design modeling (Jim Ross-Deere & Co) {{:mbse:mbse_iw_2012-transition_to_model_based_embedded_system_development-ross.pptx | Transition to Model Based Embedded System Development}} *Model-based Manufacturing modeling (Greg Pollari-Rockwell Collins) {{:mbse:mbse_iw_2012-manufacturing_modeling_with_sysml-pollari-reva.pptx | Manufacturing Modeling}} **10:15 - 12:00** *Presentations on multi-disciplinary engineering modeling approaches, key practices, and integration challenges (35 minutes each) *Cost/Logistics Modeling (Chris Adams-Raytheon) {{:mbse:mbse_iw_2012-cost_logistics_modeling_revb-adams.ppt | Cost & Logistics Modeling}} *System Modeling (John Watson-Lockheed Martin) {{:mbse:mbse_iw_2012-sys_modeling_and_req_flowdown_watson_r5.pptx| System Modeling }} *Multi-disciplinary mechanical modeling, management and exchange (Dr Clark Briggs-ATA Engr) {{:mbse:mbseiw2012-multidisciplinary_modeling-briggs-b.pptx | Multi-Disciplinary Mechanical Modeling, Management and Exchange}} **13:00-14:15** * Breakout sessions to discuss integration challenges and opportunities * Engineering change scenario - Joe Bedocs facilitator * Requirements flowdown scenario - John Watson facilitator * Integration and verification scenario - Ron Williamson facilitator **14:15-15:00** * Breakout session outbriefs (15 minutes each) * Engineering change scenario outbrief {{:mbse:mbse_iw_2012-changeScenario_reportOut.pptx| Change Scenario Report Out }} * Requirements flowdown scenario outbrief {{:mbse:mbse_ws_-_req_flowdown_breakout_session_outbrief_r1.pptx| Requirement Flowdown Breakout Report Out }} * Integration and verification scenario outbrief {{:mbse:mbse_iw_2012-outbrief_i_v.ppt| Integration and Verification Report Out }} **15:15-17:15** * Advanced Approaches to Cross Domain/Cross Discipline Modeling (30 minutes each) *ESA Concurrent Design Facility – Hans Peter de Koning (ESA) {{:mbse:mbse_iw_2012-MBSE_and_the_ESA_Concurrent_Design_Facility-deKoning.ppt | (MBSE and the) ESA Concurrent Design Facility}} *Multi-disciplinary Approach for Industrial Phases – Harald Eisenmann (Astrium), Joachim Fuchs (ESA/ESTEC) {{:mbse:mbse_iw_2012-multidisciplinary_approach_for_space_industrial_phases-eisenmann-a.ppt | Multidisciplinary Approach for Space Industrial Phases}} {{:mbse:mbse_iw_2012-model_explorer-traces-eisenmann.ppt | Model Explorer-Traces}} *Model-based Approach using Integrated Visualization – Steve Corns {{:mbse:mbse_iw_2012-mbse_visualization_-corns.pptx | MBSE Visualization}} *Progress on Integrating OWL with SysML– Steve Jenkins (JPL) {{:mbse:mbse_iw_2012-progress_on_integrating_owl_and_sysml-2012-01-22-jenkins.pptx | Progress on Integrating OWL and SysML}} **17:15-17:30** * Summary and Wrap-up (refer to below) **WORKSHOP TAKEAWAYS** The MBSE Initaitive Chairs attempted to distill a few of the key takeaways from the Workshop in terms of the following observations and challenges: //Observations// *Continued strong interest and participation in MBSE from the systems engineering community *Continued progress up the MBSE Capability roadmap - maturing methods - improved integration between design and analysis *Increased awareness of the need to integrate the system model with discipline models (e.g. analysis, hw, sw, test, and project mgmt) *Domain Specific Languages and/or extensions critical to integrate with other disciplines and domains (e.g. spacecraft, automotive) *Integrating ontology with architecture modeling languages enables - Domain specific vocabularies - Formal logic foundation to aid in reasoning about the system //Challenges// *Model management in a multi-disciplinary modeling environment that address -Configuration management and change control of models, tools, and simulation data throughout the life cycle -Security and access control *Solutions may include - Integrating system models into PLM environment (not explicitly stated, but implied) - Model interoperability based on standards *Enhanced MBSE usability *More formal methods and precise languages *Need for reference architectures, variant modeling capability, and model reuse **MBSE SURVEY** We asked the participants to take a short survey on MBSE that is available from the MBSE Wiki. The survey was administered by Mary Bone and Dr Robert Cloutier from Stevens Institute of Technology. The{{:mbse:mbse_survey_results-summary.ppt | MBSE Survey Results Summary}} includes some of the results that you may find useful. The survey results represents a limited sample of 136 folks from the INCOSE MBSE distribution or attendees at the workshop. You can draw your own conclusions from this data, but I would summarize as follows: “There appears to be a significant increase in the interest and application of MBSE, but there still are many obstacles to overcome to fully institutionalize the practice. However, those who are adopting it appear to be seeing value in the results.” //Back To// [[:Start| MBSE Wiki]].