ISO/IEC 7816-2 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts

return to the ISO Standards

Data sheet for Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts

Title	Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
Acronym
Version	2007
Document Number	7816-2
Release Date	2007
Reference	https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-2:ed-2:v1:en

Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.

Scope

This part of ISO/IEC 7816 specifies the dimensions and locations for each of the contacts on an integrated circuit card of an ID-1 card type. It also provides information on the way to identify which standards define the use of the contacts.

This part of ISO/IEC 7816 is to be used in conjunction with ISO/IEC 7816-1.