===== RFC7252 - The Constrained Application Protocol (CoAP) =====
[[dido:public:ra:xapend:xapend.b_stds:tech:ietf:start| return to the IETF Standards ]]

<table>
<caption>Data sheet for RFC7252 The Constrained Application Protocol (CoAP)</caption>
| Title                      | The Constrained Application Protocol (CoAP) |
| Acronym                    | CoAP |
| Version                    | 2014 |
| Document Number            | RFC7252 |
| Release Date               | June 2014  |
| Reference                  | [[https://tools.ietf.org/html/rfc7252]] |
</table>

  : **Note**: The following is an excerpt from the official IETF RFC. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.


===== Abstract =====

The Constrained Application Protocol (CoAP) is a specialized web transfer protocol for use with constrained nodes and constrained (e.g., low-power, lossy) networks.  The nodes often have 8-bit microcontrollers with small amounts of ROM and RAM, while constrained networks such as IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs) often have high packet error rates and a typical throughput of 10s of kbit/s.  The protocol is designed for machine-to-machine (M2M) applications such as smart energy and building automation.

CoAP provides a request/response interaction model between application endpoints, supports built-in discovery of services and resources, and includes key concepts of the Web such as URIs and Internet media types.  CoAP is designed to easily interface with HTTP for integration with the Web while meeting specialized requirements such as multicast support, very low overhead, and simplicity for constrained environments.


/**=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
/* To add a discussion page to this page, comment out the line that says 
  ~~DISCUSSION:off~~
*/
~~DISCUSSION:on|Outstanding Issues~~
~~DISCUSSION:off~~