===== ISO/IEC 7816-01 Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics =====
[[dido:public:ra:xapend:xapend.b_stds:tech:iso:start| return to the ISO Standards ]]
Data sheet for [[dido:public:ra:xapend:xapend.a_glossary:i:identification|Identification]] cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics
| Title | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| Acronym | |
| Version | 2011|
| Document Number | 7816-1|
| Release Date | 2011 |
| Reference | [[https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-1:ed-2:v1:en]] |
: **Note**: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.
==== Scope ====
This part of ISO/IEC 7816 specifies the physical characteristics of integrated circuit cards with contacts. It applies to identification cards of the ID-1 card type, which can include embossing and/or a magnetic stripe and/or tactile [[dido:public:ra:xapend:xapend.a_glossary:i:id|identifier]] mark as specified in ISO/IEC 7811. Test methods are specified in ISO/IEC 10373-1.
This part of ISO/IEC 7816 applies to cards that have a physical [[dido:public:ra:xapend:xapend.a_glossary:i:interface|interface]] with electrical contacts. It does not, however, define the nature, number, and position of the integrated circuits in the cards.
/**=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
/* To add a discussion page to this page, comment out the line that says
~~DISCUSSION:off~~
*/
~~DISCUSSION:on|Outstanding Issues~~
~~DISCUSSION:off~~