ISO/IEC 7816-02 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts

return to the ISO Standards

Table 1: Data sheet for Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
Title Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
Acronym
Version 2007
Document Number 7816-2
Release Date 2007
Reference https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-2:ed-2:v1:en
Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.

Scope

This part of ISO/IEC 7816 specifies the dimensions and locations for each of the contacts on an integrated circuit card of an ID-1 card type. It also provides information on the way to identify which standards define the use of the contacts.

This part of ISO/IEC 7816 is to be used in conjunction with ISO/IEC 7816-01 Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics.