Sidebar
dido:public:ra:xapend:xapend.b_stds:tech:iso:7816-1
ISO/IEC 7816-01 Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics
Table 1: Data sheet for Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics
| Title | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| Acronym | |
| Version | 2011 |
| Document Number | 7816-1 |
| Release Date | 2011 |
| Reference | https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-1:ed-2:v1:en |
- Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.
Scope
This part of ISO/IEC 7816 specifies the physical characteristics of integrated circuit cards with contacts. It applies to identification cards of the ID-1 card type, which can include embossing and/or a magnetic stripe and/or tactile identifier mark as specified in ISO/IEC 7811. Test methods are specified in ISO/IEC 10373-1.
This part of ISO/IEC 7816 applies to cards that have a physical interface with electrical contacts. It does not, however, define the nature, number, and position of the integrated circuits in the cards.
dido/public/ra/xapend/xapend.b_stds/tech/iso/7816-1.txt · Last modified: 2021/08/06 17:23 by murphy
Translations of this page:
