Sidebar
dido:public:ra:xapend:xapend.b_stds:tech:iso:7816-12
This is an old revision of the document!
ISO/IEC 7816-12 Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures
Table 1: Data sheet for Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures
| Title | Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures |
| Acronym | |
| Version | 2005 |
| Document Number | 7816-12 |
| Release Date | 2005 |
| Reference | https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-12:ed-1:v1:en |
- Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.
Scope
This part of ISO/IEC 7816 specifies the operating conditions of an integrated circuit card that provides a USB interface. Figure 1 shows the assignment of the contact fields for a USB interface and - to illustrate interoperability - the assignment as used in ISO/IEC 7816-3.
<caption></cpation>
dido/public/ra/xapend/xapend.b_stds/tech/iso/7816-12.1624564888.txt.gz · Last modified: 2021/06/24 16:01 by nick
Translations of this page:
