Sidebar
dido:public:ra:xapend:xapend.b_stds:tech:iso:7816-12
ISO/IEC 7816-12 Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures
Table 1: Data sheet for Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures
| Title | Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures |
| Acronym | |
| Version | 2005 |
| Document Number | 7816-12 |
| Release Date | 2005 |
| Reference | https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-12:ed-1:v1:en |
- Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.
Scope
This part of ISO/IEC 7816 specifies the operating conditions of an integrated circuit card that provides a USB interface. Figure 1 shows the assignment of the contact fields for a USB interface and - to illustrate interoperability - the assignment as used in ISO/IEC 7816-03 Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols.
Figure 1: Assignment of contacts for USB Integrated Circuit Card
dido/public/ra/xapend/xapend.b_stds/tech/iso/7816-12.txt · Last modified: 2021/08/09 12:26 by murphy
Translations of this page:
