Sidebar
dido:public:ra:xapend:xapend.b_stds:tech:iso:7816-2
ISO/IEC 7816-02 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
Table 1: Data sheet for Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts
| Title | Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts |
| Acronym | |
| Version | 2007 |
| Document Number | 7816-2 |
| Release Date | 2007 |
| Reference | https://www.iso.org/obp/ui/#iso:std:iso-iec:7816:-2:ed-2:v1:en |
- Note: The following is an excerpt from the official ISO catalog. It is provided here as a convenience and is not authoritative. Refer to the original document as the authoritative reference.
Scope
This part of ISO/IEC 7816 specifies the dimensions and locations for each of the contacts on an integrated circuit card of an ID-1 card type. It also provides information on the way to identify which standards define the use of the contacts.
This part of ISO/IEC 7816 is to be used in conjunction with ISO/IEC 7816-01 Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics.
dido/public/ra/xapend/xapend.b_stds/tech/iso/7816-2.txt · Last modified: 2021/08/06 13:35 by murphy
Translations of this page:
